SATA 7200 RPM Hard Drives

Key takeaways

  • 5,377 listings match this collection right now.
  • A 3Gb/s-era 7,200 RPM drive tops out at a much smaller capacity than a 6Gb/s one, since the slower link became the practical ceiling before larger platters ever needed the extra bandwidth.
  • 7,200 RPM is the same rotational class as nearline SAS, so a SATA and a nearline SAS drive at the same capacity perform similarly; the difference is dual-port redundancy.
  • Older 3Gb/s SATA drives here tend to be smaller legacy capacities, while 6Gb/s SATA covers the larger modern sizes, so generation and capacity move together in this collection.

7200 RPM is the standard rotational speed for SATA capacity drives. This collection spans the 3Gb/s and 6Gb/s SATA generations, so match the link rate and bay width to the backplane.

5,377 listings in this collection, filtered from Server Hard Drives. The part number and manufacturer are stated on every listing, and the condition wherever the catalogue records one. For quantity, request a volume quote.

How to choose server hard drives

Match the interface and link rate the controller or backplane presents, the bay width (2.5-inch or 3.5-inch), and the rotational class already in the array: 10K and 15K drives for latency-sensitive duty, 7200 RPM nearline drives for capacity. Replacing an array member also means matching capacity and sector format, or the controller can reject the drive.

Other server hard drives collections

Browse every collection by specification