Key takeaways
- 128 listings match this collection right now.
- Gen9 backplanes add 12Gb/s SAS support alongside 6Gb/s, while Gen8 backplanes run 6Gb/s only, so a 12Gb/s SAS drive is the Gen9-and-later choice rather than a Gen8 one.
- Gen9 predates the digitally signed firmware validation HPE introduced with Gen10, so iLO on a Gen9 system does not check a drive's firmware signature the way a Gen10 system does.
- Gen9 spans the period when 4Kn drives entered the market, so read the sector format off the drives already in the array rather than assuming it from the server generation.
HPE ProLiant Gen9 servers (DL360, DL380, DL560, ML350, BL460c) share the Smart Carrier tray with Gen8 and take 6Gb/s and 12Gb/s SAS and SATA drives. Every listing here is catalogued as supplied for a Gen9 platform.
128 listings in this collection, filtered from Server Hard Drives. The part number and manufacturer are stated on every listing, and the condition wherever the catalogue records one. For quantity, request a volume quote.
How to choose server hard drives
Match the interface and link rate the controller or backplane presents, the bay width (2.5-inch or 3.5-inch), and the rotational class already in the array: 10K and 15K drives for latency-sensitive duty, 7200 RPM nearline drives for capacity. Replacing an array member also means matching capacity and sector format, or the controller can reject the drive.
Other server hard drives collections
Browse every collection by specification
Account
