HP P47322-B21 3.84TB SATA 6Gb/s Read Intensive 2.5-in SSD

Key specifications

The figures below come from this listing's own record. They are the ones that decide whether a part drops into an existing system.

• Storage Capacity: 3.84 TB. Usable capacity as the manufacturer states it.
• Drive Interface: SATA. The bus the drive expects; the controller or backplane has to present the same one.
• Interface Standard: 6Gb/s SATA. The negotiated link standard.
• Maximum Data Transfer Rate: 6Gb/s. Peak link rate, which is not the same as sustained throughput.
• Drive Width: 2.5". Bay width, which decides whether it drops into the slot.
• Form Factor: SFF. The size or mounting class the catalogue records for this part.

Confirming fit

Memory Clearance does not publish a verified compatibility list for P47322-B21. Whether a part of this type is supported is defined by the system or switch vendor's own compatibility matrix, not by the part on its own.

The dependable check is the part number. Read the installed part number from the system's management interface and compare it with the number on this listing. If you send your server model with a quote request, it is checked against this part before you order.

Other HPE Solid State Drives listings

Other parts in the same brand and category. These are not substitutes for this part number; check the specification before ordering.

• HPE Q0F42A#0D1 7.68TB SAS 12Gb/s 2.5-Inch Internal Solid State Drive
• HP 806554-001 480GB Multi-Level Cell (MLC) SAS 2.5-inch Solid State Drive for StoreServ 7000
• HPE Q2N43A 480GB SATA 6Gb/s Mixed Use 2.5-Inch Solid State Drive
• HPE Q8S41A 3.2TB SAS (SFF) PI2 Solid State Drive
• HPE Q5V86AR 1.92TB SATA 6Gb/s 2.5-Inch Solid State Drive for SimpliVity 380 (5-Pack)
• HPE Q6M14A 3.2TB SAS 12Gb/s Mixed Use 2.5-Inch Solid State Drive
• HPE R4F97B 15.36TB PCI Express NVMe 2.5-Inch Solid State Drive for Alletra 9000
• HPE Q6M07A 800GB SAS 12Gb/s Mixed Use 2.5-Inch Solid State Drive
• HPE Q6L96A 400GB SAS 12Gb/s Write Intensive SFF 2.5-Inch Solid State Drive
• HPE H7B61AR 800GB MLC SAS 12GB/s 2.5-inch SSD for Integrity MC990 Gen10 Server

Common questions

Is P47322-B21 in stock?

Stock moves, so the quantity shown on this listing is the current figure. For a larger quantity, send the part number and how many you need and the answer comes back against that exact number. Quotes are answered weekdays 8:00 am to 5:00 pm PST.

Does this drive come with a tray?

Only if the listing name says so. Drive listings are either bare or supplied in a generation-matched hot-swap tray, and the name states which.

Can I use this to replace a failed array member?

Match the interface, the capacity, the sector format and the class of the drive already in the array. A mismatch on any of those can be rejected by the controller.

What do I send to get a price on P47322-B21?

The part number, the quantity, the condition you will accept and the server model it goes into. That is enough to answer in one pass.

Guides

• Reading memory and drive specs
• Replacing a failed array drive
• Which drive tray fits your server
• Buying in volume