Key takeaways
- 699 listings match this collection right now.
- A drive without HPE's digitally signed Gen10 firmware still stores data normally, but the Smart Storage Administrator on this generation marks it as not genuine rather than reporting a real hardware problem.
- Base Gen10 CPUs support PCIe 3.0 only; PCIe 4.0 arrived with the Gen10 Plus refresh's newer Xeon generation, so an NVMe SSD's full rated throughput needs Gen10 Plus specifically, not base Gen10.
- The Gen10 Plus refresh added tri-mode Smart Array controllers that present SAS, SATA and NVMe through one controller, a capability base Gen10 controllers do not have.
HPE ProLiant Gen10 servers (DL360, DL380, DL385, DL560, ML350, BL460c and the Gen10 Plus refresh) take SATA, SAS and NVMe drives, and HPE drives for this generation carry digitally signed firmware the management stack expects. Every listing here is catalogued as supplied for a Gen10 platform.
699 listings in this collection, filtered from Solid State Drives. The part number and manufacturer are stated on every listing, and the condition wherever the catalogue records one. For quantity, request a volume quote.
How to choose solid state drives
Interface first: SATA drives work on a SAS backplane, SAS drives do not work on a SATA-only controller, and NVMe connects over PCIe lanes in U.2, U.3, M.2, E1.S or add-in-card form factors that are not interchangeable with each other. Then the endurance class the workload needs, stated as drive writes per day. Then whether the listing includes the hot-swap tray, which every listing name states.
Other solid state drives collections
Browse every collection by specification