Seagate ST2000DL001 2TB 3Gb/s SATA 5900 3.5-in 32MB Hard Drive

Key specifications

The figures below come from this listing's own record. They are the ones that decide whether a part drops into an existing system.

• Storage Capacity: 2 TB. Usable capacity as the manufacturer states it.
• Drive Interface: SATA. The bus the drive expects; the controller or backplane has to present the same one.
• Interface Standard: 3Gb/s SATA. The negotiated link standard.
• Maximum Data Transfer Rate: 3Gb/s. Peak link rate, which is not the same as sustained throughput.
• Drive Type: Internal. Where the drive is designed to sit.
• Drive Width: 3.5". Bay width, which decides whether it drops into the slot.
• Cache Storage: 32 MB. Onboard cache or buffer.

Confirming fit

Memory Clearance does not publish a verified compatibility list for ST2000DL001. Whether a part of this type is supported is defined by the system or switch vendor's own compatibility matrix, not by the part on its own.

The dependable check is the part number. Read the installed part number from the system's management interface and compare it with the number on this listing. If you send your server model with a quote request, it is checked against this part before you order.

Other Seagate Desktop Hard Drives listings

Other parts in the same brand and category. These are not substitutes for this part number; check the specification before ordering.

• Seagate 1-796-210-11 40GB IDE Ultra ATA/100 5400 3.5-inch 2MB Hard Drive
• Seagate ST3000VN006 3TB 6Gb/s SATA 5400 3.5-inch 256MB Hard Drive
• Seagate ST4000NE0015 4TB 6Gb/s SATA 7200 3.5-inch 128MB Hard Drive
• Seagate ST6000VXB23 6TB 6Gb/s SATA 5900 3.5-in 256MB Hard Drive
• Seagate ST4000NM027B 4TB 6Gb/s SATA 7200 3.5-inch 256MB Hard Drive
• Seagate ST4000DMA06 4TB 6Gb/s SATA 7200 3.5-in 128MB Hard Drive
• Seagate ST8000DXA01 8TB 6Gb/s SATA 7200 3.5-inch 256MB Hard Drive
• Seagate ST4000NC002 4TB 6Gb/s SATA 7200 3.5-in 128MB Hard Drive
• Seagate ST32122A2 2GB 4500RPM ATA 3.5-Inch Hard Drive
• Seagate ST8000VN0004 8TB 6Gb/s SATA 7200 3.5-inch 256MB Hard Drive

Common questions

Is ST2000DL001 in stock?

Stock moves, so the quantity shown on this listing is the current figure. For a larger quantity, send the part number and how many you need and the answer comes back against that exact number. Quotes are answered weekdays 8:00 am to 5:00 pm PST.

Does this drive come with a tray?

Only if the listing name says so. Drive listings are either bare or supplied in a generation-matched hot-swap tray, and the name states which.

Can I use this to replace a failed array member?

Match the interface, the capacity, the sector format and the class of the drive already in the array. A mismatch on any of those can be rejected by the controller.

What do I send to get a price on ST2000DL001?

The part number, the quantity, the condition you will accept and the server model it goes into. That is enough to answer in one pass.

Guides

• Reading memory and drive specs
• Replacing a failed array drive
• Which drive tray fits your server
• Buying in volume