Seagate ZA2000CM10003 2TB 6Gb/s SATA Triple-Level Cell 2.5-inch SSD
* NOTE: Image may not exactly match the product
Need Assistance? We are here to help!
Experience swift and dependable storage with the Seagate BarraCuda 120 ZA2000CM10003 SSD, equipped with a SATA 6Gb/s interface that supports SATA 3.2 at 6.0Gbps. This SSD comes in a standard 2.5-Inch design and is available in 2TB capacities, utilizing advanced 3D TLC NAND flash memory for robust and efficient performance.
Engineered for reliability, it offers end-to-end data protection with an impressive MTBF of 1.8 million hours. Note that the BarraCuda 120 SSD does not feature power loss protection; use the Standby Immediate command (0xE1h) before shutdown to safeguard your data.
The figures below come from this listing's own record. They are the ones that decide whether a part drops into an existing system.
Memory Clearance does not publish a verified compatibility list for ZA2000CM10003. Whether a part of this type is supported is defined by the system or switch vendor's own compatibility matrix, not by the part on its own.
The dependable check is the part number. Read the installed part number from the system's management interface and compare it with the number on this listing. If you send your server model with a quote request, it is checked against this part before you order.
Other parts in the same brand and category. These are not substitutes for this part number; check the specification before ordering.
Stock moves, so the quantity shown on this listing is the current figure. For a larger quantity, send the part number and how many you need and the answer comes back against that exact number. Quotes are answered weekdays 8:00 am to 5:00 pm PST.
Only if the listing name says so. Drive listings are either bare or supplied in a generation-matched hot-swap tray, and the name states which.
Match the interface, the capacity, the sector format and the class of the drive already in the array. A mismatch on any of those can be rejected by the controller.
The part number, the quantity, the condition you will accept and the server model it goes into. That is enough to answer in one pass.