Dell 400-BEDQ 3.2TB PCIe NVMe 3.1 x4 MLC U.2 2.5-in SSD

Key specifications

The figures below come from this listing's own record. They are the ones that decide whether a part drops into an existing system.

• Storage Capacity: 3.2 TB. Usable capacity as the manufacturer states it.
• Drive Interface: PCI Express NVMe. The bus the drive expects; the controller or backplane has to present the same one.
• Interface Standard: PCI Express NVMe 3.1. The negotiated link standard.
• Maximum Data Transfer Rate: 8Gb/s. Peak link rate, which is not the same as sustained throughput.
• Flash Memory Technology: Triple-Level Cell. The NAND type, which tracks with endurance and cost.
• Form Factor: U.2. The size or mounting class the catalogue records for this part.

Confirming fit

Memory Clearance does not publish a verified compatibility list for 400-BEDQ. Whether a part of this type is supported is defined by the system or switch vendor's own compatibility matrix, not by the part on its own.

The dependable check is the part number. Read the installed part number from the system's management interface and compare it with the number on this listing. If you send your server model with a quote request, it is checked against this part before you order.

Other Dell Solid State Drives listings

Other parts in the same brand and category. These are not substitutes for this part number; check the specification before ordering.

• Dell GW526 32GB Multi-level Cell SATA 6Gb/s 2.5-Inch Solid State Drive
• Dell 341-5582 64GB 3Gb/s SATA MLC 2.5-in Solid State Drive
• Dell 0RM423 64GB SATA Solid State Drive
• Dell 0HR466 32GB ATA 1.8-Inch Solid State Drive
• Dell CMDH9 128GB 6Gb/s SATA Multi-Level Cell 2.5-inch Solid State Drive
• Dell HR466 32GB ATA 1.8-Inch Solid State Drive
• Dell 85K8V 800GB 3Gb/s SATA Multi-Level Cell 2.5-inch Solid State Drive
• Dell MM590 32GB Single-Level Cell SATA 1.8-Inch Solid State Drive
• Dell 0GW522 32GB 6Gb/s SATA Multi-Level Cell 2.5-inch Solid State Drive
• Dell 341-7723 64GB 3Gb/s SATA MLC 2.5-in Solid State Drive

Common questions

Is 400-BEDQ in stock?

Stock moves, so the quantity shown on this listing is the current figure. For a larger quantity, send the part number and how many you need and the answer comes back against that exact number. Quotes are answered weekdays 8:00 am to 5:00 pm PST.

Does this drive come with a tray?

Only if the listing name says so. Drive listings are either bare or supplied in a generation-matched hot-swap tray, and the name states which.

Can I use this to replace a failed array member?

Match the interface, the capacity, the sector format and the class of the drive already in the array. A mismatch on any of those can be rejected by the controller.

What do I send to get a price on 400-BEDQ?

The part number, the quantity, the condition you will accept and the server model it goes into. That is enough to answer in one pass.

Guides

• Reading memory and drive specs
• Replacing a failed array drive
• Which drive tray fits your server
• Buying in volume